Rough roads can make towing nerve-racking, but this mount softens the impact. The Phantom XT uses an internal torsion system that twists and compresses to absorb shock between truck and trailer. Instead of feeling every bump, the built-in motion isolation keeps your ride steadier and more comfortable with no airbags or fragile parts to maintain—just keep the grease zerks serviced and roll on.
Getting your trailer height right is key for safe, even towing. This adjustable setup has four stacked 2" receivers that let you fine-tune up to a 4" drop or a 3" rise. Whether you’re hauling different trailers or switching between jobs, you can move the welded dual-ball mount up or down to keep everything level and balanced.
When you’re pulling serious weight, strength matters most. The welded 2" and 2-5/16" balls are built for up to 10,000 lbs gross towing weight and 1,000 lbs tongue weight. The high-strength steel construction and corrosion-resistant powder coat give it the solid feel and durability that heavy-duty towing demands.
You don’t have to unhook this mount when the trailer’s parked. The extra stacked receivers double as attachment points for hitch-mounted gear like a bike rack or cargo carrier. It’s a handy way to keep your setup useful year-round without swapping parts.
Towing gear takes a beating from weather and road grime, so durability counts. The Phantom XT’s high-strength steel shank and corrosion-resistant powder coat stand up to the elements trip after trip. It’s dependable gear you can leave hitched without worrying about rust or wear creeping in.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. Steven here with etrailer.com. Today, we're looking at our Gen-Y Phantom XT adjustable two-ball mount with torsion flex and a two-inch hitch stinger on the end of it. Folks, this is rated at 10,000 pounds capacity. That's on both balls, and the two and five 16s, and it's stamped on top of both of them. Now, this gives you built-in shock absorption with an internal torsion system.
It's gonna smooth out bumps, jolts, and road shock. The dual ball mount, included it again, gives you two options, two and five 16ths or two inch, and that's as simple as pulling the pin out here, and then flipping over the ball assembly here. And you can go up or down as far as your heights, you can raise or low it. The drops about four to four and a quarter inches, depending on where you're measuring from. And the rise is about three inches, again, depending on how you're measuring it on your setup.
Now, you can also remove this and use the extra receiver openings for things like bike racks, carriers, and more if you so choose as well. Heavy duty strength, as you can see, everything is super thick. The shine on the back is solid steel, so yes, it is lighter than their traditional torsion flex because this is the phantom. It's a little bit lighter on this half of it. But the front piece and everything here, still has some heavy duty metal, so it still is quite heavy as far as total weight, but it is a little lighter, than the traditional torsion flex.
Well, folks, that is gonna wrap it up for our look together. I'm Steven, thanks for watching.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews
Easy and wuick
Well built product
Really like it and think it will fit my needs
The friendliest service and excellent prompt delivery. Thank you very much. Happy holidays to you.
Love it!
Amazing and versatile product.
Beautiful function, fit and finish. The little extra length of the Hitch seems to improve hard turn backing.
It works great for me as I have several trailers with different coupler heights.
Purchased this to lower my bike rack to a level I could lift my e-bike. Easy to install and I was able to load my bike. Shipped the same date I ordered it. I haven't driven down the road with it yet so I'm anxious to see how the bike rides.
like height adjustment, overall very happy with product. Only issue I had is bought cargo hauler that would not fit in hitch without driving it in but not sure a hitch problem. Good product.
This is a great mount. It’s the best that I’ve ever had.
This thing is so rad - totally stout, love the matte black
Add the 1 7/8” ball & you have a hitch that does it all.
The warehousemen must have forearms like Popeye. You can tell that engineering came before profit margin here. Thank you.
Looks great both doesn't fit 2025 f150
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.